Tace jaka don PP da PE Plant

1. Takaitaccen Gabatarwa

Bag tace ana daukar shi azaman na'ura mai mahimmanci don tsarin samar da PP & PE da tsarin isar da foda wanda ake amfani da shi don dawo da iskar gas, isar da dawo da iskar gas, foda da barbashi a cikin iska.

2. Halaye, aikace-aikace da ma'aunin fasaha

2.1 Hali:

Tace jakar ta ƙunshi harsashi mai tacewa, tsarin wankin baya da matattarar jaka.

Ana tallafawa tace jakar jaka tare da keji tare da kamfani. Backwash manifold yana saman jakar tacewa. Kafofin watsa labarai suna gudana cikin harsashi tace daga mashigai, kuma suna wucewa ta tace jakar daga waje zuwa ciki. Tace mai tsaftataccen iskar gas yana fita daga waje. Ana toshe foda a waje na abubuwan tacewa don samar da kek ɗin tacewa. Yayin da kaurin kek ɗin tace yana ƙaruwa, raguwar matsewar tace yana ƙaruwa a hankali. Ana kunna shirin wankin baya da zarar raguwar matsa lamba/lokaci ya kai ƙimar ƙima. Ana kunna bawul ɗin bugun jini na Solenoid nan take a ƙarƙashin ikon mai sarrafa bugun jini. Ana fitar da iskar gas daga tankin buffer daga babban wanki na baya. Lokacin da bututun iskar gas ya ratsa ta cikin kamfani, yawancin iskar gas da ke kewaye za su fita cikin jakar tacewa tare da iskar gas. Don haka ana iya zubar da ƙura. Ana cire ƙura a jere. Sauran layin yana ƙarƙashin aiki na yau da kullun lokacin da baya yana kan layi. Ana sanya alamar matakin a ƙasan hopper don fara fitar da foda bisa ga shirin.

2.2 Aikace-aikace:

dawo da foda don tsarin isarwa

2.3 Ma'aunin Fasaha

Tace daidai:2～100μm;

Abun ciki foda: 5 ~ 100mg/m3

Matsalolin farko: ≤2Kpa

Matsin aiki: 0.01 ~ 1.0 Mpa;

Yanayin aiki: 0～400 ℃;

Wutar lantarki: AC220/DC24V;

Ajin hana fashewa: Ex ia(d) ⅡBT4(mafi kyau)

Shell abu: Carbon karfe, bakin karfe